Drake Research PEEK News: Bearing Grade and Teflon PEEK
Bearing Grade and Teflon PEEK
Bearing Grade PEEK contains carbon fiber, graphite, and PTFE lubricants.
Bearing grade PEEK offers the lowest coefficient of friction and the best machinability of all PEEK grades. PEEK withstands high temperatures, wear, load, and aggressive chemicals in both dry and lubricated service.
- Bearings, bushings, and washers
- Seals and slides
- Fatigue strength
- High strength and rigidity
- Chemical resistance
- Creep resistance
- Noise reduction
- Seal conformability to resist leaking
- Dimensional and thermal stability
Sizes of PEEK Rod: 1/8" thru 3.5" diameter
PEEK Plate is available in 1/8" to 1/2" thickness x 4" width.
Metric and custom sizes are available.
- Questions and to inquire for stock / email:
Phone: 281.255.6855 / Fax: 281.255.6853
Natural PEEK | Carbon/Glass Fiber PEEK || PEEK HT | Bearing Grade & Teflon PEEK